Thread: Ngraver liners
View Single Post
  #2  
Old 03-08-2017, 10:46 AM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,552
Default Re: Ngraver liners

Hi Gail, The tool hole in the nose of the airgraver is .133" in diameter. Sny shank that will fit that will work. So if the shank is 1/8" round it will fit. If it is 1/8" square it will not fit. Chamfer the end of the shank a little before inserting so it doesn't catch on the nose oring.
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote