View Single Post
  #22  
Old 02-17-2009, 12:44 PM
Brian Hochstrat Brian Hochstrat is offline
Gold
 
Join Date: Mar 2007
Posts: 168
Default Re: Western Bright Cut Tutorial

Gordon, they work pretty well, below is a good example , being the backbone is even cut bright. One thing that many bright cutters are concerned about with pneumatics, is the chatter, which are little vibration lines left in the bright cut and which are undesirable. As you can see from the pic below, there is no chatter due to the increased stroke speed and a properly sharpened graver. The tungston piston can vibrate more noticeably, due to the weight, but when the idle is adjusted properly, it is not a distraction. I would suggest giving it a try, it is a quality tool. -Brian


[IMG]
__________________
http://www.bhsaddles.com/
Reply With Quote