Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community

The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 13,521. Welcome to our newest member, jmiles2008
EngravingForum.com - Domain since Feb 7, 2003

Graver Video Conferencing is empty Join now!


Go Back   Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community > Forums > Antique Engraver's Tools -Hand Engraving Forum
ENGRAVING TOOLS - Paypal accepted Classes Glossary Feedback Tips Sharpening Bulino Videos Forum Policies

Reply
 
Thread Tools
  #1  
Old 02-28-2016, 04:17 PM
JKM1942 JKM1942 is offline
Copper
 
Join Date: Feb 2016
Location: Burien, Washington
Posts: 5
Default Antique engraving question

I have a Merwin-Hulbert pocket revolver that has the following inscription engraved on the its curved backstrap: "To J. J. Hill Scenic 1893 From SPD". The engraving is in cursive style. I believe this was engraved using a machine because repeated letters are identical and the engraving is the same width and depth over its entirety. The engraving font size is very close to the above quote.

My question is: Did the technology exist in 1893 to machine engrave cursive text over a curved cast steel surface ?

FYI James J. Hill founded the Great Northern Railroad. Scenic Washington was the site of driving of the last spike in 1893, thus completing the trans-continental railroad.

Thanks - John
Reply With Quote
  #2  
Old 03-01-2016, 06:51 AM
JJ Roberts's Avatar
JJ Roberts JJ Roberts is offline
Platinum
 
Join Date: Apr 2006
Location: Northern Virginia
Posts: 1,859
Default Re: Antique engraving question

John,Can you put up pictures of the gun? it would help. J.J.
Reply With Quote
  #3  
Old 03-01-2016, 09:19 PM
JKM1942 JKM1942 is offline
Copper
 
Join Date: Feb 2016
Location: Burien, Washington
Posts: 5
Default Re: Antique engraving question

Thanks for responding. I don't know if my camera can focus close enough to do this, but I'll try.

John
Reply With Quote
  #4  
Old 03-02-2016, 01:45 AM
chujybear chujybear is offline
Platinum
 
Join Date: Jul 2009
Posts: 648
Default Re: Antique engraving question

Quote:
Originally Posted by JKM1942 View Post
Thanks for responding. I don't know if my camera can focus close enough to do this, but I'll try.

John
Put it on the macro setting will focus close enough for sure (if it's a point and shoot). Set for two second timer. Use tripod if you've got it. But should work handheld w any camera out of tge last ten tears or so.
Reply With Quote
  #5  
Old 03-04-2016, 03:06 PM
JKM1942 JKM1942 is offline
Copper
 
Join Date: Feb 2016
Location: Burien, Washington
Posts: 5
Default Re: Antique engraving question

I hope these pictures are usable; they're at the limit of my camera's close-up capability.
Attached Images
File Type: jpg P1010002.jpg (52.5 KB, 0 views)
File Type: jpg P1010004.jpg (69.0 KB, 0 views)
File Type: jpg P1010005.jpg (56.5 KB, 0 views)
File Type: jpg P1010009.jpg (67.1 KB, 0 views)
Reply With Quote
  #6  
Old 04-05-2016, 10:09 PM
JKM1942 JKM1942 is offline
Copper
 
Join Date: Feb 2016
Location: Burien, Washington
Posts: 5
Default Re: Antique engraving question

I really need some help with this.

Thanks - John
Reply With Quote
  #7  
Old 04-05-2016, 10:42 PM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 3,700
Default Re: Antique engraving question

John, It looks like diamond drag done with a pantograph or maybe spinning D bit in the same type of pantograph. Yes, it will go over a slight curved surface and were around back then. https://en.wikipedia.org/wiki/Pantograph
__________________
__________________________________
Steve Lindsay
www.AirGraver.com
Reply With Quote
  #8  
Old 04-06-2016, 09:58 PM
JKM1942 JKM1942 is offline
Copper
 
Join Date: Feb 2016
Location: Burien, Washington
Posts: 5
Default Re: Antique engraving question

Steve - Thanks for the help. Your input is a big step forward in determining that the piece could be a legitimate presentation item.

John
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Conduct
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 07:50 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.