View Full Version : NSK rotary tool
can I use the air regulator I have for my Lindsay Air Graver to also run a rotary tool, NSK?
Mike576
12-23-2020, 10:12 PM
You should be able to. I have the foot control classic and run steve lindsays bench jewel rotary tool off the auxiliary port. The nsk presto is set up in the same way as steves tool off the regulator. I have the nsk and the bench jewel and both use seemingly the exact same pedal. The only issue i can see would be that the presto says specifically to use 35 psi. Whereas when i asked steve about what psi to run the bench jewel he said he uses it at whatever the classic is set to. So the psi can be varied. Because of this i run the presto off its own regulator and keep it at 35 psi as recommended by the manufacturer.
dhall
12-25-2020, 07:46 PM
Yes.
vBulletin® v3.8.6, Copyright ©2000-2024, Jelsoft Enterprises Ltd.