OK!!
Maybe totally Blind, Not Really Tru!! but it can work.:smilie
5:
Danny I tried the Video Idea, But Couldn't See where to Focus on,:smilie
5:
Must Be The Blind Fold.:willy_nilly:
No Sorting the Gravers No Problem, I have a Rotary Tray with holes in the Top, I put some tape on the front Edge, with the Various Deg. and sort the Gravers in the specified Area. I also have some small "o" rings in various colors, (they use them in computor work.) That I use for various angles.
For the gravers that end up on the table for Sharpening.
Somebody in another Thread wanted to Know what to do to get a 50deg face,
I use Two ways,
Perspex spacer 6mm thick under the templates. But Make sure You use the Small template on this same spacer, for the heels and Primary. !!:yesnod:
I made a Shorter spacer tube, 9mm shorter (22.5), this i only use with the large templates, No Spacer. for the front face angle. 50deg.
See Ya!!!