Quote:
Originally Posted by WVEngraver
btw: A quick question ... what was "ye olde method" of image transfer that you used to capture such detail?
Chris
|
Chris,
For that I used the talcom powder method, I still do from time to time.
Draw the design onto tracing paper.
Rub your fingers over the work area, the oils from your skin help the next part.
Sprinkle a small amount of talc onto the work area and lightly pat it down.
Blow the residue off.
Place the tracing on top and scribe over the design with a rounded tool.
Take the tracing off and the lines are left in the talc, scribe over these as normal.
Of course all the detail of the scenes cannot be put in, in this way, that is done later.
Phil