Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community

The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,761. Welcome to our newest member, AnicaLin
EngravingForum.com - Domain since Feb 7, 2003

Graver Video Conferencing is empty Join now!


Go Back   Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community > Forums > Tutorials and Contests - Hand Engraving Forum
ENGRAVING TOOLS - Paypal accepted Classes Glossary Feedback Tips Sharpening Bulino Videos Forum Policies

Reply
 
Thread Tools
  #1  
Old 05-23-2013, 10:39 AM
be1965 be1965 is offline
Copper
 
Join Date: May 2013
Posts: 2
Default china white

My Dad was a jewelry pro after WW II. He used China white to copy a single pattern.on to a complete set of silver ware. How do I do that?
Reply With Quote
  #2  
Old 05-23-2013, 08:43 PM
chujybear chujybear is offline
Platinum
 
Join Date: Jul 2009
Posts: 740
Default Re: china white

China white is essentially guache.
Wet your finger w a tiny bit of it and tap it on whatever surface you want to decorate. Then it will take pencil.
You can trace what you want to do. Flip it and follow the lines on the back. It will transfer on to the china white.
Reply With Quote
  #3  
Old 05-24-2013, 03:22 AM
SEngraver SEngraver is offline
Platinum
 
Join Date: Sep 2008
Location: UK.
Posts: 3,484
Default Re: china white

Quote:
Originally Posted by be1965 View Post
My Dad was a jewelry pro after WW II. He used China white to copy a single pattern.on to a complete set of silver ware. How do I do that?
Hi Be1965,
Welcome to the Engraving Forum.
All I can add to chujybears info is let the Chinese white dry completely and use a soft pencil when you trace the design.

SE
__________________
Learn from those who know more than you do and teach those who know less than you do. - I.M.
Reply With Quote
  #4  
Old 05-24-2013, 05:52 AM
JJ Roberts's Avatar
JJ Roberts JJ Roberts is offline
Platinum
 
Join Date: Apr 2006
Location: Northern Virginia
Posts: 2,070
Default Re: china white

Chinese white is ok for prescious metals but not for steel, if left on to long you'll find a coating of rust it happen to me with a gun. J.J.
Reply With Quote
  #5  
Old 05-25-2013, 08:38 AM
Big-Un Big-Un is offline
Platinum
 
Join Date: May 2006
Location: Eden, NC
Posts: 624
Default Re: china white

The best thing to wet the Chinese white with is plain old spit.

Bill
Reply With Quote
  #6  
Old 05-26-2013, 10:55 AM
redgreen redgreen is offline
Platinum
 
Join Date: May 2011
Location: TX, USA
Posts: 924
Default Re: china white

Absolutely, if you want your China White to work properly you must collect a reasonable supply of aged Midwestern (preferably uncontaminated) saliva. This may seem a little unpleasant to use but you must harden yourself for the real rigors of engraving. You can see Mike Dubber using China White in some of his videos, he uses his own un-aged saliva, but he is a Midwesterner who is not young and is an experienced professional, so use caution if you intend to follow his example.

Bob
__________________
“Art is never finished, only abandoned.”
― Leonardo da Vinci
Reply With Quote
  #7  
Old 05-29-2013, 10:27 AM
be1965 be1965 is offline
Copper
 
Join Date: May 2013
Posts: 2
Default Re: china white

Thanks everyone. Dad must have used China White on the silverware, re-penciled his pattern each time to transfer it to each piece. I was too young to remember the process.
Reply With Quote
  #8  
Old 06-10-2013, 05:53 AM
Roger B2 Roger B2 is offline
Platinum
 
Join Date: Apr 2007
Location: Adelaide, South Australia
Posts: 345
Default Re: china white

I was watching some of the old FEGA videos the other day and I think it was Terry Wallace from his 1991 fine line seminar who was talking about the use of China White. He described a method of applying the white with the use of an eraser and brush that made the application more durable rather than just spit. Will have to try and find it to let you know unless someone comes forward with the method first.

Roger
Reply With Quote
  #9  
Old 06-15-2013, 06:55 AM
KMPaulson's Avatar
KMPaulson KMPaulson is offline
Steel
 
Join Date: Feb 2012
Location: Saskatoon
Posts: 17
Default Re: china white

In my shop, we use the term "Setter's friend" for spit. It's handy for arranging diamonds, face down, prior to setting them. It's always right there when you need it.
http://www.engravingforum.com/showth...1074#post81074
Hope I did the link right. It's the jar on the left. The one labelled "Ken's spitty ol' China White"
Reply With Quote
  #10  
Old 06-24-2013, 08:55 AM
KMPaulson's Avatar
KMPaulson KMPaulson is offline
Steel
 
Join Date: Feb 2012
Location: Saskatoon
Posts: 17
Default Re: china white

Actually, for transfering multiple designs, transfer wax is probably what he used. One piece is engraved, then transfer wax is rubbed into the design and wiped off the rest of the surface. Then a moistened piece of drawing paper is placed over the engraving. Over this is placed another piece of dry paper and the surface is burnished to press the paper into the wax. Peel off the dry piece and, carefully, peel off the bottom piece. The reversed design will be seen on the paper. This can be pressed onto the next piece to be engraved. The design is quite faint, but useable. It'll work for several transfers, depending on how carefully you position everything and how hard you press on each subsequent transfer.
If you're only doing one transfer, say a pair of cufflinks, Rodico or Sticky-Tac or some such can be substituted for the paper. It's stretchy, though, so it can distort if you're not careful.
Mike Dubber has and excellent technique using Scotch Tape but, being an old guy myself, I'm betting your dad used the wax/paper technique. I got it from F.H.Rees' book, published in about 1906.
Reply With Quote
Reply

Bookmarks


Posting Conduct
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 08:29 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.