Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community

The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,763. Welcome to our newest member, mtan1446
EngravingForum.com - Domain since Feb 7, 2003

Graver Video Conferencing is empty Join now!


Go Back   Engraving Forum.com - The Internet's Largest and Fastest Growing Engraving Community > Forums > Lindsay AirGraver Info - Hand Engraving Forum
ENGRAVING TOOLS - Paypal accepted Classes Glossary Feedback Tips Sharpening Bulino Videos Forum Policies

Reply
 
Thread Tools
  #1  
Old 01-26-2009, 09:20 PM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,555
Default New templates for Carl Bleile's tool points !!!

Carl Bleile did a wonderful article in the last Fega newsletter about his sculpting technique; pictures of this technique can be seen in Carl’s photo album along with banknote style engraving.

This may seem to be a new method of sharpening but Carl says it’s been around for 100 years yet somehow has gotten lost in the new methods. These tools are efficient, cut aggressively, and need less sharpening than usual. They are strong enough for hammer and chisel, push, or the complete line of Lindsay power tools.

(1) banknote engraving for darker lines,
(2) scraping tool for removing tool marks, final contouring, also removes excess gold and shapes raised inlays after inlaying
(3) background removal tool with special side grinds to get around main area without nicking.
(4) medium to deep outline, removing background in tight areas, preparing for background removal and gold inlay.

Carl sent the chisels and scrapers he uses and we are designing templates for them. After Carl double checks them, I'll have the first batch of them made and available for purchase. He could then help with tips and tricks for using them. Here are close-up pictures of Carl's tool points.





Steve
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #2  
Old 01-27-2009, 09:32 AM
jlseymour's Avatar
jlseymour jlseymour is offline
Platinum
 
Join Date: Feb 2007
Location: Mt. Dora FL
Posts: 1,568
Default Re: New templates for Carl Bleile's tool points

That is one of the great things about these forums everyone is so willing to share...

Thanks Carl, they look like some important new grinds...

Jerry
Reply With Quote
  #3  
Old 01-27-2009, 09:37 AM
D.DOUGLAS's Avatar
D.DOUGLAS D.DOUGLAS is offline
Platinum
 
Join Date: Feb 2007
Location: Princeville Illinois Central part
Posts: 285
Default Re: New templates for a new style of tool !!!

Cant wait to give them a try. You guys are really making it way to easy to sharpen tools. Doug:yesnod:
Reply With Quote
  #4  
Old 01-28-2009, 03:51 PM
mckeenh's Avatar
mckeenh mckeenh is offline
Platinum
 
Join Date: Mar 2008
Location: Stevensville, Mt
Posts: 812
Wink Re: New templates for Carl Bleile's tool points !!!

I see the chisels and am aware of their use but I don't see any scrapers. Is this correct or did I miss something?

Neil:yesnod:
Reply With Quote
  #5  
Old 01-28-2009, 04:35 PM
Daniel Houwer's Avatar
Daniel Houwer Daniel Houwer is offline
Platinum
 
Join Date: Mar 2008
Location: Haarlem, Holland
Posts: 2,125
Send a message via Skype™ to Daniel Houwer
Default Re: New templates for Carl Bleile's tool points !!!

Hi Neil,

Think you missed this one
Quote:
(2) scraping tool for removing tool marks, final contouring, also removes excess gold and shapes raised inlays after inlaying
2 as in second from the left.

Greetings,


Daniel
__________________
The best things in life are still made by hand.
Daniël's Photo Album
Reply With Quote
  #6  
Old 01-28-2009, 05:47 PM
Dave London's Avatar
Dave London Dave London is offline
Platinum
 
Join Date: Apr 2006
Location: Colorado Springs
Posts: 2,360
Default Re: New templates for Carl Bleile's tool points !!!

Thanks Carl and Steve more tools fantastic I love tools. Some of the shape kind of look like japanese tange (sp) This is great as I have been trying to get Japaneese chisels (tange) but no luck so far
Reply With Quote
  #7  
Old 01-30-2009, 11:05 PM
carl bleile's Avatar
carl bleile carl bleile is offline
Platinum
 
Join Date: Mar 2008
Location: cincinnati,ohio
Posts: 385
Default Re: New templates for Carl Bleile's tool points !!!

The templates should be here very soon. I have used this style of tools for many years. they are very versatile ( banknote,bulino to gold inlay ) less prone to breakage, and east to sharpen, 3 of the tools only need the face touched up then back to cutting. To answer a question ahead of time I designed these tools to make the work easier for engravers, I get ZERO dollars and don't expect to. It's like repaying the old engravers that taught me by passing this on to others.
Teaching a newer person is like shaking the hand of an old master and saying thanks.
Carl Bleile
southwest,Ohio
Reply With Quote
  #8  
Old 01-31-2009, 10:11 AM
SVD's Avatar
SVD SVD is offline
Platinum
 
Join Date: Mar 2008
Location: Kansas City, MO
Posts: 2,555
Default Re: New templates for Carl Bleile's tool points !!!

Quote:
Originally Posted by carl bleile
Teaching a newer person is like shaking the hand of an old master and saying thanks.
Carl Bleile
Carl

That's the kind of thing that would make a nice sig line or t-shirt. It really sums things up.

I've got to get the roll case made for the other new templates I just got and send Steve the pattern for the cases (have to finish making that too).

Question, are the templates for your tools about the same height as the one for the Universal point or are they tall like the original 70 degree Bulino point?
__________________
Enjoy!

Steve :->
(KCSteve in most forums)
SVD's Photo Album
Reply With Quote
  #9  
Old 01-31-2009, 11:51 AM
Mack's Avatar
Mack Mack is offline
Steel
 
Join Date: Nov 2008
Posts: 65
Default Re: New templates for Carl Bleile's tool points !!!

I am sure glad you see it that way Carl. You sure have helped me a lot. Those old masters must have tired arms from shaking your hand. Thanks much. Mack
Reply With Quote
  #10  
Old 01-31-2009, 03:06 PM
WVEngraver's Avatar
WVEngraver WVEngraver is offline
Platinum
 
Join Date: Apr 2008
Location: Tennessee
Posts: 1,656
Default Re: New templates for Carl Bleile's tool points !!!

Hi Mack, great to see you posting.

------

I had the opportunity to try out some of Carl's gravers while visiting him a while back. Simple to maintain and very effective. Very durable in either a push graver (under my "iron thumb" ) or in an Airgraver. FEGA Journal issue #81 is an essential compliment to Carl's set and I hope he does another article in the near future (hint).

Chris
Reply With Quote
  #11  
Old 01-31-2009, 06:46 PM
Dave London's Avatar
Dave London Dave London is offline
Platinum
 
Join Date: Apr 2006
Location: Colorado Springs
Posts: 2,360
Default Re: New templates for Carl Bleile's tool points !!!

Thanks Carl
Dont know what else to say:whoo:
Reply With Quote
  #12  
Old 02-02-2009, 12:11 AM
Herman Knives's Avatar
Herman Knives Herman Knives is offline
Platinum
 
Join Date: Feb 2008
Posts: 260
Default Re: New templates for Carl Bleile's tool points !!!

Carl that first one the banknote bulino graver for darker lines looks great as does that last one. Looks like i am going to have to save up for Steves sharpening system and a load of cool templates. Thank you for giving so much to us all on here, Bless You, Tim.
Reply With Quote
  #13  
Old 02-02-2009, 11:18 AM
Guarnera Guarnera is offline
Copper
 
Join Date: May 2008
Location: Lancaster, S. California
Posts: 4
Default Re: New templates for Carl Bleile's tool points !!!

Is there anyway to get this newsletter without being a member of FEGA? I'm not an engraver, yet, but I am interested, and would love to see this article about Mr. Bleile technique. Can I get a copy anywhere?

Tony G
Reply With Quote
  #14  
Old 02-02-2009, 04:48 PM
Dave London's Avatar
Dave London Dave London is offline
Platinum
 
Join Date: Apr 2006
Location: Colorado Springs
Posts: 2,360
Default Re: New templates for Carl Bleile's tool points !!!

Tony
As far as I know the Engraver Magazine is only for FEGA members. You should join as the magazine alone is worth the membership price:yesnod:
Reply With Quote
  #15  
Old 02-02-2009, 04:57 PM
Daniel Houwer's Avatar
Daniel Houwer Daniel Houwer is offline
Platinum
 
Join Date: Mar 2008
Location: Haarlem, Holland
Posts: 2,125
Send a message via Skype™ to Daniel Houwer
Default Re: New templates for Carl Bleile's tool points !!!

I agree with Mr London!
Just joined and cant wait for the next issue of the engraver.
__________________
The best things in life are still made by hand.
Daniël's Photo Album
Reply With Quote
  #16  
Old 02-03-2009, 09:28 PM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,555
Default Re: New templates for Carl Bleile's tool points !!!

Carl's prototype sample templates were completed today. We have instructions written on these templates. I'll photograph them later today, post them and then ship them to Carl for him to test and verify they are grinding his points well. When the templates are ready to ship, Carl will be providing pictures and his article to help describe the uses and techniques. After Carl checks the prototypes and gives the go ahead we will start production. They should be ready to ship to everyone in a few days after that.

A few hours later....
Here is a shot of them.
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #17  
Old 02-04-2009, 06:37 AM
ghost ghost is offline
Gold
 
Join Date: Apr 2006
Posts: 128
Default Re: New templates for Carl Bleile's tool points !!!

for the scraper you would use drill rod or a lindsay graver
Reply With Quote
  #18  
Old 02-04-2009, 09:55 AM
Steve Lindsay's Avatar
Steve Lindsay Steve Lindsay is offline
Administrator
 
Join Date: Feb 2006
Location: Kearney, NE
Posts: 4,555
Default Re: New templates for Carl Bleile's tool points !!!

Quote:
Originally Posted by ghost View Post
for the scraper you would use drill rod or a lindsay graver
3/32" square graver blanks. Although you could use drill rod if desired.
__________________
__________________________________
Steve Lindsay
AirGraver.com
EngravingArtist.com
Reply With Quote
  #19  
Old 02-04-2009, 01:52 PM
SVD's Avatar
SVD SVD is offline
Platinum
 
Join Date: Mar 2008
Location: Kansas City, MO
Posts: 2,555
Default Re: New templates for Carl Bleile's tool points !!!

Interesting!

The Scraper template looks about the same size as the 'small' templates for most of the templates. The DeepLine template looks to be a 'tall'.

I'm hoping to get those darn roll cases done tonight - looks like I need a Tall for these as well as the Regular for the last set of templates I got.
__________________
Enjoy!

Steve :->
(KCSteve in most forums)
SVD's Photo Album
Reply With Quote
  #20  
Old 02-06-2009, 05:41 AM
jlseymour's Avatar
jlseymour jlseymour is offline
Platinum
 
Join Date: Feb 2007
Location: Mt. Dora FL
Posts: 1,568
Default Re: New templates for Carl Bleile's tool points !!!

Put me down for a set when Carl OK's them...
I'd also like 2 or 3 of the holding device with the nut so I don't have to change the holder from one fixture to the other so often...
Thanks Steve for all your work...
Jerry
Reply With Quote
  #21  
Old 02-20-2009, 07:28 AM
paul66 paul66 is offline
Steel
 
Join Date: May 2008
Location: Australia Vic Horsham
Posts: 73
Default Re: New templates for Carl Bleile's tool points !!!

Hi Carl
Thanks for sharing you experience in showing us your tools and enabling us to duplicate this style ( or the tools at least ) . As a lot of members like myself have to go it alone, having the right tools takes a lot of the guess work out of the equation.

I see from an other thread that the tools are now available, and they will be on my next wish order form steve.

One (hopefully not too dumb a ) question, how do you use, or how does the scraper tool work, I have read of their use, but it looks nothing like I imagined, it looks like a big plow, does it chip at the work??, and why not use a flat instead??
I love the examples of your work, just cannot visualize how this tool achieves it

Thanks Paul
Reply With Quote
  #22  
Old 02-20-2009, 11:36 AM
carl bleile's Avatar
carl bleile carl bleile is offline
Platinum
 
Join Date: Mar 2008
Location: cincinnati,ohio
Posts: 385
Default Re: New templates for Carl Bleile's tool points !!!

Thank all of you for your interest and kind words. I will be starting threads on how to use the templates,then show the tools and how I use them. Sometimes it is hard to type in words what can be shown but Ill do my best.
Carl Bleile
southwest,Ohio
p.s. Paul the scraper is for finial finishing , it's a hand push tool that needs very little pressure, it also works great for taking down gold after inlaying with less worry about damage to the base area. The size of the tips of my tools are easily changed to fit the work by useing the template or by hand.
Reply With Quote
  #23  
Old 03-29-2009, 12:59 AM
masoud mehrjouei masoud mehrjouei is offline
Copper
 
Join Date: Mar 2009
Posts: 2
Default Re: New templates for Carl Bleile's tool points !!!

Hi Carl,

very nice pics, I wanna know what kind of steel are these tips and how they are manufactured.
Reply With Quote
  #24  
Old 10-25-2011, 05:53 PM
mondo mondo is offline
Steel
 
Join Date: Mar 2011
Location: souther california
Posts: 25
Default Re: New templates for Carl Bleile's tool points !!!

are their videos to show relief engraving ?
Reply With Quote
  #25  
Old 11-05-2012, 08:35 AM
david rogers david rogers is offline
Copper
 
Join Date: Oct 2012
Location: cleveland ga. 30528
Posts: 2
Default Re: New templates for Carl Bleile's tool points !!!

i am starting over i guess but finding all of this info. i will get back to engraving knifes as i have had open heart then i just finished ceamo 6 months of it for colon cancer but ready to get started again thanks for the info. from everybody
Reply With Quote
  #26  
Old 11-05-2012, 09:00 AM
SEngraver SEngraver is offline
Platinum
 
Join Date: Sep 2008
Location: UK.
Posts: 3,484
Default Re: New templates for Carl Bleile's tool points !!!

Quote:
Originally Posted by david rogers View Post
i am starting over i guess but finding all of this info. i will get back to engraving knifes as i have had open heart then i just finished ceamo 6 months of it for colon cancer but ready to get started again thanks for the info. from everybody
Hi David R,

I Welcome to the Engraving Forum.
It is good the have you with us, after difficulties come good times too.
I wish all the best for you for the future.
SE
__________________
Learn from those who know more than you do and teach those who know less than you do. - I.M.
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Conduct
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 12:39 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.